TABLE-MAKING 122x122cm

By Indria Sari

Materials:
1pc of plywood size 122 x 122 cm
2pcs timber size 4x6 cm length 576 cm
Cut these timber into :
4pcs timber length 122cm to support frame of the top of the table
1pc timber length 144cm
4pcs table legs length 32cm
2pcs side board for the table’s legs sized 122cm
1pc timber length 114cm to support the centre part
½ kg nails size 5 cm and 7cm

Tools :
Saw wood
Measurement tape
Hammer
Crowbar

The making process:
1. Prepare all materials and tools needed.
2. Measure the plywood sized 122 x 122cm
3. Measure the timber with
a. 4 pcs table frame sized 122cm
b. 1 pc middle support frame sized 144cm
c. 4 table legs length 32cm
d. 2pcs side board for the table legs sized 122cm
e. 1pc middle part of table legs sized 130cm
4. Cut all the timbers based on the measurement stated on point 3.
5. Nail these following items one by one:
• 2 table legs nailed to the right side of the table.
• Measure the leg of the table 5cm from the bottom, nail it onto the right side board of the table.
• 2 table legs nailed to the left side of the table.
• Measure the leg of the table 5cm from the bottom, nailed it onto the right side board of the table.
• The left and right side boards are glued and nailed with the front and back side boards.
• Then, nail the lower part of the leg with 1 middle side of the table leg.
• Then, nail the front and the back sides of the table with the middle side of the table.
• Now, we have built the frame of the table. To finalise it, nail the plywood onto the frame.

Translated by Anita Linggar